Steel frames and trusses for Ballina
Steel wall frames, roof trusses and floor systems for Ballina projects, made to your plans at Crowley Vale and delivered as labelled kits.
Supplying Ballina from Crowley Vale
Ballina is about 185 km south-east of our Crowley Vale factory in a straight line (the road distance is longer).
Other towns we supply near Ballina: Byron Bay (~26 km), Cabarita Beach (~59 km), Murwillumbah (~59 km) and Kingscliff (~67 km).
What to know about building in Ballina
From Ballina Shire Council, state agencies, the Bureau of Meteorology and the ABS. Each item links to its source.
Ballina Shire Council notes that high tides combined with heavy-rain floodwater pose a significant flood threat and sea level rise is expected to worsen flooding.
SourceBallina Shire has a Coastal Zone Management Plan with coastal erosion hazard zones mapped for areas including Lennox Head.
SourceIn the 2021 Census, Ballina had a median age of 56, and 32.8% of occupied dwellings were semi-detached, row or terrace houses or townhouses.
SourceThe Bureau of Meteorology's Ballina Airport AWS (058198) records a mean annual rainfall of 1,782.0 mm and a mean maximum temperature of 24.6 °C (1992-2026).
SourceBallina Shire Council notes that over 60% of Ballina Island is a 'trapped low point' drained only by pipes through surrounding higher ground, with the lowest points around Tamar, Grant and Moon streets.
SourceThe NSW North Coast Regional Plan 2041 designates Ballina as the only Strategic Centre on the Far North Coast, as recorded in Ballina Shire's Local Strategic Planning Statement.
Source
Council-wide planning notes for Ballina Shire Council: see the Gold Coast & Northern NSW page
Frame design in Ballina
- Wind classification
- Set lot by lot in Ballina under AS 4055; send us your site's classification with the plans. · How wind classes work
- Salt exposure
- Ballina is a coastal town. Tell us how far the site is from the water: coating and detailing are chosen for it. · Coatings and coastal sites
- Flood levels
- Check Ballina Shire Council's flood information for the lot first. If it sets a minimum floor level, a raised steel floor system is one way to meet it. · Steel floor systems
- Bushfire mapping
- NSW bush fire prone land status is on the property's planning certificate; your certifier sets the requirements.
- NSW rules apply
- Ballina is in New South Wales, so NSW owner-builder rules apply: a permit is needed for work over $10,000, and approved training is required above $20,000. Source
Steel framing available in Ballina
- WSteel Wall Frames
- TSteel Roof Trusses
- FSteel Floor Systems
- KComplete Steel Framing Kits
- SIndustrial Sheds & Warehouses
Projects we frame around Ballina
Quote a Ballina job
Send your plans with the site address. Delivery to Ballina is confirmed in your quote.
Before you send plans: Does steel framing rust? Coatings, the coast and site storage
Steel framing in Ballina: questions
Do you supply steel frames and trusses to Ballina?
Yes. Ballina is about 185 km south-east of our Crowley Vale factory and part of our Gold Coast & Northern Rivers NSW service area, with Byron Bay and Cabarita Beach nearby. Delivery to your site is confirmed in the quote; call 07 2142 1772 or send your plans.
Does Ballina Shire Council flood mapping affect a steel frame in Ballina?
It can: a minimum floor level may mean raising the floor, which changes the floor framing and sometimes wall heights. Send the property's flood report with your plans.
Do NSW owner-builder rules apply in Ballina?
Ballina is in New South Wales, so NSW owner-builder rules apply: a permit is needed for work over $10,000, and approved training is required above $20,000. Check the current rules with the NSW Government.
Building in Ballina?
Send the plans for a steel frame quote, or call 07 2142 1772.